[ new products ]
iSign
design J.M. Duthilleul
A polycarbonate exterior and an original and technological design makes these fluorescent T16 fittings stand out.IP67 certifies the elevated resistance to dust and water penetration, making the fittings ideal instruments for work spaces, industrial areas, stations and undergrounds, pedestrian areas, wellness and relaxation areas, parking areas or other spaces that have both interior as well as exterior components.
Lighting is homogeneous and direct glare is reduced thanks to the stripes on the entire body of the fitting. Available in two diameters, 80 and 110 mm, in two lengths. There is a single lamp or a two-lamp version as well as an RGB version with DALI control gear. The RGB versions can be controlledm by the ‘Colour Equalizer’ system.
These products are preconfigured for Plug&Play. A smart card is available upon request and can launch several customized programmes.
Can be installed as wall-mountings or ceiling-mountings, and as horizontal or vertical pendants with single or double modules. An internal plate supports the lamps, and there are interior passthrough cables and quick connecting terminal boxes. No tools are required for installation of the end caps, which decreases installation and maintenance operations.
[ product specifications ]
Fittings for use with T16 lamps
Polycarbonate with anti-UV exterior body and end caps; interior structure made of aluminium and steel sheet.
Body and end caps made of transparent striped polycarbonate with limited glare.
Double M24 cable clamp uses Dmax=15,5mm2 electric cables.
Versions ready for pass-through cables, complete with cables and quick-connecting terminals
End caps can bee unhooked via stainless steel clips; ordinary maintenance operations require no tools. Extractable plate for lamp changes.
Electric terminal boxes for quick connection to interrupt electrical connection in case an end cap is open.
Electronic fluorescent cables, electronic with emergency light and RGB.
Emergency versions complete with inverter and batteries; emergency lighting permanent duration of 1 hour with terminals ready for REST MODE.
RGB versions have dimmable DALI ballasts. Plug&play connection to colour equalizer control system.
RGB versions complete with lamps (1xRED, 1xGREEN, 1xBLUE).
Pendants have precision adjustment system.
The technical characteristics of the fitting comply with EN60598-1 standard.
IP67
F seal
IMQ-ENEC approval
Class of Insulation II
Class of Insulation I (on some models)
Polycarbonate with anti-UV exterior body and end caps; interior structure made of aluminium and steel sheet.
Body and end caps made of transparent striped polycarbonate with limited glare.
Double M24 cable clamp uses Dmax=15,5mm2 electric cables.
Versions ready for pass-through cables, complete with cables and quick-connecting terminals
End caps can bee unhooked via stainless steel clips; ordinary maintenance operations require no tools. Extractable plate for lamp changes.
Electric terminal boxes for quick connection to interrupt electrical connection in case an end cap is open.
Electronic fluorescent cables, electronic with emergency light and RGB.
Emergency versions complete with inverter and batteries; emergency lighting permanent duration of 1 hour with terminals ready for REST MODE.
RGB versions have dimmable DALI ballasts. Plug&play connection to colour equalizer control system.
RGB versions complete with lamps (1xRED, 1xGREEN, 1xBLUE).
Pendants have precision adjustment system.
The technical characteristics of the fitting comply with EN60598-1 standard.
IP67
F seal
IMQ-ENEC approval
Class of Insulation II
Class of Insulation I (on some models)